E
n
g
li
s
h
Bischoff & Bischoff GmbH • 03.01.2012
13
Fig. 6
S-VR
S-Care
7.2. Side sections
The side sections on the S-VR and S-Care are removable.
Removing side sections
• Turn the small star screw on the front of the wheelchair
anticlockwise (A).
• Pull the side section upwards to remove it.
Installing side sections
• Insert the side section at the front and back into the
frame socket (B).
• Screw the star screw clockwise to tighten it (A).
7.3. Seat back
The seat back angle can be infinitely adjusted from -4° for-
ward to 30° or 82° back. The conversion from 30° to 82° or
vice versa is not done at the factory, because the HMV no. is
only approved for a 30° seat back angle..
Adjusting the angle of the seat back
• Set parking brakes
• Pull and hold Bowden cable lever (see Fig. 7)
• Adjust the seat back angle to the desired position
(see Fig. 7)
• Release Bowden cable lever
Extending seat back and head rest
The S-VR / S-Care wheelchair comes standard with a long
seat back extension that can be used as a head rest. It is
inserted into the guide from above and fastened with the
star screw.
Fig. 7
