E
n
g
li
s
h
Pyro start
Bischoff & Bischoff GmbH •03.01.2012
21
4.9. Side parts
Fig. 14
4.10. Hand brakes
The Pyro start wheelchair is equipped with a handbrake which
can be used by the user of the wheelchair. It should be only
used for parking. It is not suitable for braking during a ride!
To brake you use your palms to make a weak pressure on
the grab wheel. After you have put the brakes on in this
way you use both brakes pulling the brake handle forward.
The wheelchair has now been safely stopped.
• To make it easier to get on and off the wheelchair both
side parts with the armrests can be swung backwards.
• Use the lock device lever pressing it gently with your
finger and at the same time swing the side part
backwardly.
Never use the side parts to carry the wheelchair!
• To lock the side part fold it forward and with a gentle push
let it snap in the armrest
Make sure that while you pivot the side parts no
garments or implements can be caught. Before
putting the wheelchair into operation for the
first time check whether the side parts are
tightened well.
• The arm support for the side parts (desk/long)
are short mounted at delivery.
• The readjustment to long is carried out by rotating the
arm support 180 ° and mounting it on the opposite
side part.(picture 16)
Fig. 15
Fig. 16
