07.09.2017
EN
15
14
Econ XXL
| XXL-wheelchair
XXL-wheelchair |
Econ XXL
Folding
Place your wheelchair next to you. Fold the foot plate upward
(fig. 06) and undo the Velcro fastener of the back cover under the seat.
Loosen the hand screw on the right handle and swing the push bar
down.
Now pull the seat cover upward until the chair is completely folded,
and press the armrests together (fig. 07).
4.2. Leg rests
The Econ XXL is equipped with removable leg rests (fig. 08).
Both leg supports are supplied with the foot plates attached. The
foot plates on both leg supports can be folded upwards in the sitting
position. In addition, a continuous footrest is available for you to use.
Continuous footrest
You can easily fit the continuous footrest onto both foot plates (fig. 9).
You can easily pull the footrest off again to get in and out.
Assembling the leg rests
Hold the legrests on the upper part and bring it into the leg rest fixtures
so that they point outwards. Swing the leg rests forward until they lock
in place (fig. 10).
Pay attention to your fingers during the folding
process to prevent a risk of pinching.
06
07
Swinging the leg rests
To make it easy for you to get on and off the wheelchair you can fold
up the foot plates or swing the leg supports outside or inside without
removing them.
•
Pull the button, in this way, the lock is opened (fig. 11).
•
Now you can swing the leg rest outwardly or inwardly.
•
If necessary, fold the foot plate upward beforehand.
To get back to the original state just swing the leg rests frontally until
they snap in.
When you get off your wheelchair make sure you
NEVER step on the foot plate under no circumstances!
Adjustment of the leg rest length
The length of the leg rest can be adjusted up to 12 cm. To do this you
have to undo the socket-head cap screw (hexagon socket 5 mm) and
adjust the leg rest according to your choice (fig. 12).
08
09
Before you start driving your wheelchair make
sure that the leg rests are firmly fixed.
10
11
12
The maximum extension length is marked!
