15
“F6” - AUTOMATIC ZERO AT START-UP (*)
Trough this step one sets the weight percentage for the automatic acquisition of the gross zero at start-up. If at the
start-up a weight is detected that is within the programmes percentage of the total capacity, it will be cleared; if the weight
is not within this tolerance, the display, after a few instants, shows the current weight.
Press
M+
to select one of the suggested percentages: from 0 to 20.
“F7” - MANUAL ZERO RANGE (*)
Trough this step one sets the weight percentage for the manually acquiring the gross zero; if, in the normal weighing
phase, by pressing
ZERO
, a weight within the programmed percentage of the total capacity, it will be cleared.
Press
M+
to select one of the suggested percentages: from 0 to 20.
“F8” - LIMITATION OF THE TARE FUNCTIONS (*)
on
limitation
disabled
oFF
limitation
enabled
Refers to the 6.3.1 section for the functioning mode.
“F9” - A/D CONVERTER POINTS
By pressing
TARE
the instrument shows the A/D converter points relative to the weight on the scale.
By pressing
ZERO
one zero the value.
Press
TARE
to exit the step.
“F10” - SPEED SETTING ADC CONVERTER READING SPEED
By pressing
TARE
one sets the reading speed of the ADC converter; the set value corresponds to the number of
readings made in a second.
Press
M+
to select one of the suggested reading speeds: 7.5, 15, 30, 60.
“F11” - BAUD RATE
By pressing
TARE
one selects the baud rate.
Press
M+
to select one of the possible speeds: 2400, 4800, 9600, 19200.
“F12” - MINIMUM AMOUNT DIVISION
By pressing
TARE
one selects the minimum amount division.
Press
M+
to select one of the suggested values: 1, 2, 5, 10.
“F13” - PRINTER (*)
off
disabled
on
enabled
“F14” - PRICE INTRODUCTION MODE
FLoAt
introduction with floating decimal point
FiXEd
introduction with fixed decimal point
“F15” - PRINTING LANGUAGE AND CURRENCY SYMBOL
By pressing
TARE
one selects the printing language.
Press
M+
to select one of the suggested values: En, it, ES, Fr, DE.
By confirming with
TARE
one
sets the text or the symbol of the currency to be printed.
Press
M+
to select
-
TEXT: Confirm with
TARE
, insert the text of the CURRENCY on 3 characters and confirm with
TARE.
-
SYMBOL: Confirm with
TARE
, enter the ASCII decimal code of the CURRENCY on 3 digits (€=254) and press
TARE
.