EN
4
De binnenkant van de Birth Alarm Premium
Below is an overview of the system components.
1.
Batteries.
2.
The 2 status lights
3.
SIM card slot
4.
USB-connector (for software update)
5.
LTE status led
5.1 “NET” –
led
5.2 “RING” –
led
5.3 “LTE” –
led
4.1
Installing/replacing batteries
When replacing the batteries for your Birth Alarm Premium you should always use alkaline
batteries (preferably "Duracell", "Panasonic", or "Varta"). The use of rechargeable batteries is
not recommended. Always replace all 3 batteries at the same time. If you cannot remove the
batteries with your fingers, you can also use a small screwdriver, as long as it is done with
care.
The batteries must always be placed with their negative pole on the spring.
Always use new batteries at the beginning of the foaling season!
If you will not be using Birth Alarm Premium for a longer period of time, such as after the
foaling season, you should remove the batteries to prevent them from leaking and causing
damage to your Birth Alarm Premium.
2
3
4
5
2
1
5.1
5.2
5.3