BIRO B1200, Operation, Service Manual & Parts List, Page: 7 / 32

7
Control Panel
•
Starting switch (automatic/manual) (1)
•
Red stop button (2)
•
Machine operating signal lamp (3)
•
Machine stop signal lamp (4)
•
Handle for speed regulation (5)
(only for model at variable speed)
Note – in the Model F4000 the regulation of the speed and the quantity of hamburgers
is made by rotating the regulating handle with a quantity of products variable from… to a
maximum of 4000 pieces per hour.
Operating Test
•
Before controlling the operation, if you
have not already done, you must assemble
the hopper, assemble the conveyor belt,
close the cover and the front protection.
•
Connect the footswitch, inserting the control
pipe into the bush on the control panel side.
•
Connect the plug to the socket.
•
Position the switch handle (1) on automatic.
•
Verify the rotation of the drum and the
conveyor belt (see the arrow).
•
Verify the lighting of the light.
•
Push the stop button (2), the machine must
stop and the light (3) must light up.
•
Position the switch handle (1) on manual.
•
Press the footswitch.
•
Verify the rotation of the drum and the
conveyor belt (see the arrow).
•
Verify the lighting of the light.
•
Push the stop button (2). The machine must stop
and the light (3) must light up.