BIRO 1433FH, Operating And Service Manual

Page: 19 / 36

16
ITEM No.: 14782K Blade Tension Screw Conversion Kit
INSTALLATION INSTRUCTIONS
Disconnect the machine from main power supply.
Loosen tension on the saw blade and remove the upper wheel assembly
Unbolt the (A) tensioning handle from the (B) blade tension screw.
At the bottom handle mount turn the (B) blade tension screw clockwise until it can be lifted out of
the (C) housing.
Apply a good food grade grease to the replacement (D) tension screw and install into the (C) hous-
ing turning counterclockwise until it bottoms out.
Replace the (A) tensioning handle. Be sure the (E) spring and (F) plunger pin are still present in
the end of the (A) handle.
Replace the upper wheel assembly and the blade.
Tension the blade.
(A) 14781 Tension Handle
(B) 14782 Blade Tension Screw
(C) 14780 Adjustment Housing
(D) 14782K Blade Tension Screw Kit
(E) 14554 Compression Spring
(F) 55178 Plunger Pin
14783 O-Ring, Large
14785 Plastic Washer
14789 O-Ring, Small
AN15S Acorn Nut, ¼-20
HHS048S Hex Head Screw ¼-20 1¼
17
14P
14P-1