Vendor: S000307
Page
6
of
9
Step 5:
Attach the hydraulic pumps (14) to the left hydraulic base support (12) and right hydraulic base
support (13) then fix the base supports to the side rails using hardware part G as shown in Fig 5.2 – do not
fully tighten yet. Insert the remainder of hardware part G and fully tighten all bolts.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6:
Join together the back bed base (15) and front bed base (16) using hardware parts H, I and J. Attach
hardware parts K using hardware part L.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
