Vendor: S000053
Page
3
of
4
Step 3:
Place the mid support (5) on top of the side frames (4) and secure using hardware parts H and I.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4:
Take the base leg (6) and fit to the mid support (5) according to the holes at the side using hardware
parts C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5:
Push hardware parts E into the mid support (5) then place hardware part F onto each slat (7).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
