Page 5 of 12
800504 - Birko Pie Warmer - April 2012 v1.02
Operation
Connect and switch on the power supply, then switch the Pie Warmer on. The Pie Warmer is thermostatically controlled
and is fitted with an indicator light and thermostat for best results. Once the thermostat is set to the desired temperature
the thermostat will cycle on and off to maintain the set temperature. The indicator light is designed to cycle on and off
to indicate when the thermostat is heating or alternatively reached the setting. The thermostats will display the current
temperature within the cabinet.
Cleaning, Care and Maintenance
Switch off the power, and disconnect the Pie Warmer from the power supply. Ensure that the unit is always switched off
and disconnected from the power supply, when cleaning, maintaining or moving.
Safety
The body of the warmer should be wiped down after each day’s operation; however, additional cleaning may be required
depending on frequency of use. The drip tray, wire racks, and glass doors can be removed and washed if necessary.
Care must be taken to allow the Pie Warmer to cool down before cleaning, maintaining or moving, remember stainless
steel and glass can burn.
Do not
immerse the Pie Warmer in water, or use jet/pressure washers to clean it.
Warm soapy water is recommended for cleaning. Cleaning agents may cause damage, and leave harmful residues, when
used for a prolonged period on stainless steel.
This appliance is not intended for use by persons (Including Children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
A Birko dealer or a Recommended Qualified Service Technician should carry out repairs if required.
If the power cord is damaged, it must be replaced by Birko Service Agent or Recommended Qualified Technician in order
to avoid a hazard.