Page 5
Kitchen Mixer 6001057 - October 2013 v1.05
Operating Instructions
BIRKO Kitchen Mixer
Model: 1005004
7 Litre
BIRKO
MIXING ARM ADJUSTMENT:
The height of the mixing arm may be adjusted to change the clearance between the arm and the base of
the mixing bowl.
-Turn off the machine at switch ( i ) and disconnect the Mixer from the power supply.
-Use a suitable spanner to release the nut on the end of the mixing arm shaft.
-The shaft can now be rotated to adjust the installed height of the mixing arm. Rotate the shaft clockwise
to increase the bowl clearance and anti clockwise to decrease the bowl clearance.
-Once the correct clearance has been achieved, securely tighten the nut and fit the mixing arm as
described on page
4.
FITTING THE MIXING BOWL:
The mixing bowl must be securely fixed to the base of the machine in order for the mixer to operate cor-
rectly.
-Turn off the machine at switch ( i ) and disconnect the Mixer from the power supply.
-Rotate the handle ( e ) clockwise to release the locking mechanism . This will allow the mixing head ( a )
to rise automatically and will expose the mixing arms.
-When the mixing head has been raised (aprox 45 deg.) release the handle ( e ) and secure it in the verti-
cal position.
-While holding the bowl ( f ) with both hands, fit it to the base of the mixer ( g ) .
-Rotate the bowl clockwise until it is firmly secured in place.
-Rotate the handle ( e ) anti-clockwise to the horizontal position to allow the mixing head to move down.
Push the mixing head down until it locks into position.
-When locked, the handle will move to the vertical position. Do not operate the mixer unless the handle is