8
PoE Power Injector
Other than 24VAC power input, BirdDog PTZ camera pro-
vides PoE power as an optional power input.
For PoE power, you must use BirdDog 80W Power PoE In-
jector: model BL-PP80. It provides high PoE power up to the
PTZ camera. Connect this PoE injector to a network switch
and then run Ethernet cable for data transmission and power
up the PoE PTZ camera (Specific model: A200 & A300) for
distance up to 100 meters.
NOTE!
• Disconnect the power from the camera before
mounting.
• Accessories such as the wall mount bracket and the
pendant mount bracket may be necessary during
mounting. For their model, refer to the accessory list
recommended by your dealer.
• The wall bearing capacity and the bracket length must
meet all onsite mounting requirements. You will need
to select a mount type based the actual environment.
Network Switch
IP Data
PoE 80W
48 VDC
100-240
VAC
24V
AC
PoE
Power
Injector
Power
supply
Mounting the camera
NOTE!
• When mounting the camera, please install the bracket
adapter to the bracket first and then mount the camera
to the bracket.
• Tighten all the screws to hold the camera securely.
• For waterproofing, apply sealant between the dome
and the bracket, wall veneer slits, and leading-out
holes of the wall.
Wall Mount Pedant or Up-Right.
•
