BIRD SignalHawk SH-36S-RM-ASL, Operation Manual, Page: 133 / 195

Measurements
119
Received Signal Strength Indicator (RSSI)
RSSI provides an audible indication at the frequency of the current marker. It will beep faster as
the received signal strength goes up and slows as it goes down.
Similar to Water Fall, power is linearly mapped to a range of 0-210 using the same range as for
the Water Fall for simplicity. The beep rate and volume are proportional to the mapped power
value at the current marker index. Values of zero are equivalent to continuous beeps and -210
are equivalent to a beep every 4 seconds.
RSSI Setup
1. Click on RSSI option ( 1 ). See Field Signal Strength Measurement with RSSI Figure .
2. To move Marker do one of the following:
•
Use mouse scroll wheel, arrow keys, or keyboard to set marker position.
•
Click on Marker to Max Peak option ( 2 ) to move marker to the peak signal.
Click on Volume option ( 3 ), set volume to desired level.
Field Signal Strength Measurement with RSSI