920-5000-XT-QSG
Rev B
www.birdrf.com
(866) 695-4569
Setting Up
1. Connect the sensor.
2. Turn on the DPM.
3. Zero the sensor (WPS and TPS only).
4. Turn on the RF source.
5. Take a reading.
Note:
The analog bar graph will respond immediately to changes in the
RF power. The major and minor displays will respond after a delay of 1 to
13 seconds, depending on the power level.
Shutting Down
Press and Hold the “OK” key for 2 seconds. This will put the unit into Sleep
mode. It will stop logging in this mode.
Press and hold the “OK” key until the “OK” key illuminates, approximately 8
seconds. This will shut the unit down completely.
USB
SERIAL
USB
SERIAL
USB
TO SENSORS
POWER METER TO PC
USB
USB
SERIAL
SERIAL
ANTENNA
ANTENNA
WIDEBAND POWER SENSOR
DIRECTIONAL POWER SENSOR
TRANSMITTER/
GENERATOR
TERMINATING POWER SENSOR
PC
POWER METER
POWER METER
