Bircher AirMission 2.W2, Translation Of The Original Operating Instruction

Page: 3 / 4

3
i
1 2 3 4 5
ON
2x
2x
2x
1 2 3 4 5
ON
SAB
SELECT
REL 1 REL21
R2 R1
1 2
1 2 3 4 5
ON
SAB
SELECT
REL 1 REL21
R2 R1
1 2
4x
5.1 Pair transmitter with receiver
5 Programming
2.
On the trans-
mitter 1
On the receiver
On the receiver
Press and
release button
Beep Wait
2 beeps
10 sec.
4.
On the trans-
mitter 2
Press and release button Beep Wait
10 sec.
3.
On the receiver
Beep Beep Release button Release button LED lights up LED flashes Press button
> 1.5 sec.
> 1.5 sec.
Press
button
> 1.5 sec.
1.
On the receiver
Press button Beep
> 1.5 sec.
> 1.5 sec.
LED lights up Release button
The distance between the transmit-
ter and receiver and additional
transmitters must be at least 1 m
2 beeps
Code saved
LED goes out
Code saved
LED goes out
Beep
Beep
Beep Beep
Beep Beep
Beep
6 Operation
6.1 Receiver LED indicators
6.2 Warning indicator for low battery voltage
Object
detected
LED off
Wicket doors
open
LED off
LED 1 LED 2
Signal sounds each time a transmitter is activated
Safety OK
Wicket doors
closed
LED on LED on
Low Battery
Beep
Channel 1:
Channel 2:
On the receiver
Press button Hold down button Short beeps Beep Wait Release button 2x beeps
Memory cleared
on all transmitters
Beep 10 sec.
> 1.5 sec.
Beep
> 3 sec.
Beep Beep Beep
10 sec.
5.2 Transmitter reset (clear pairing between transmitters and receiver)
5.3 Memory full
Beep