26
5.2.6
Interleaved 2 of 5
Restore Factory Defaults
Restore the Factory Defaults of Interleaved 2 of 5 (default)
Enable/Disable Interleaved 2 of 5
Enable Interleaved 2 of 5 (default)
Disable Interleaved 2 of 5
M
essage Length
Message length can be set to the maximum value, minimum value. The data between the maximum and the
minimum is valid.
The maximum value and minimum value can be set using Programming Command. Please check the
programming command guide for the detail.
Interleaved 2 of 5 max length command: 020404. The parameter of this command can be set from min to 80.
Interleaved 2 of 5 min length command: 020403. The parameter of this command can be set from 2 to max.
Example: Set the Barcode Message length of the minimum value is 10; the maximum value is 25.
Programming command
Max: 02040425.
Min: 02040310.
Interleaved 2 of 5 Check Digit
No check Char (default)
Validate and Transmit
Validate not Transmit
Summary of Contents for FD-011WU
Page 1: ...2D Barcode Reader User Guide V1 6CC FD 011WU...
Page 14: ...11 5 6 3 11 Barcode Scanning Delay No Delay default Delay 500MS Delay 2000ms...
Page 15: ...12 4 Data Formatting 4 1 General Configuration Add CR Add LF Add CRLF Add TAB...
Page 53: ...50 6 2 Appendix 2 Digit Barcodes 0 1 2 3 4 5 6 7 8 9 A B C D E F...
