BIQU BIQU-Hurakan, User Manual, Page: 15 / 62

15 / 62
WWW.BIQU3D.COM
After Clear Mesh, we can start manual leveling, place a
piece of A4 paper between the nozzle and print bed, adjust
the bed height of each corner of the print bed with the
thumbscrew until you can feel slight resistance when
moving the A4 paper back and forth ( Note: this is not to
adjust the nozzle height, nozzle height will be adjusted via
Z offset in your config):
When the thumbscrew is turned clockwise, the bed will rise,
and counterclockwise, the bed will descend.