Bestscope International Limited
BS-2090
4-2 Stage
4-2-2 Moving the specimen
Turn the knob of the mechanical ruler or use your hands directly to move the specimen to the position
you wanted, please.
★
be careful when you replace the objective,
please, especially after a short work distance
observation. Not let the objective to touch the stage inserted plate or the culture dish bracket.
4-2-1 Setting the specimen
（
fig.19and fig.20
）
Set the specimen in the center of the stage, please.
★
to obtain the best observe effect, please
select the containers, such as culture dish and
culture bottle, with the bottom thickness is
1.2mm, and the same thickness is also required
by the object slide when it is laid the specimen.
◎
using the
Φ
35mm culture dish
You can lay a
Φ
35mm culture dish on the stage
directly by using the standard center board
①
of the
stage.
◎
using the mechanical ruler
1. When using the 96bit or 24bit micro-titration board,
please fasten it tightly by the stage clips
②
.
2. When fastening other model boards, please use the
following supplied brackets with mechanical ruler:
●
Terasaki bracket
③
for Terrasaki board
●
Culture dish bracket
④
for
Φ
35mm culture
dish
●
Object slide bracket
⑤
for object slide and
Φ
54mm culture dish
3. Turning the transverse knob
⑥
and lengthways
knob
⑦
, move the specimen to the required
position.
( Movement Range: 120
（
width
）×
78
（
Length
）
mm
)
Figure 19
Figure 20
1
2
3
4
5
6
7
