Biotechne ProteinSimple Peggy Sue User Manual Download Page 59

Page: 59 / 88

Controlling Sally Sue and Peggy Sue

page 55

Sally Sue and Peggy Sue User Guide

Instrument status will change to cleaning, and the stop button and cleaning progress bar display. The Assay
screen provides cleaning status details:

When cleaning is done, instrument status will change to ready.

Cleaning After a Run Error

Additional cleaning steps are needed if the run is stopped because of an error. If this happens, the red Error
status light on Sally Sue’s or Peggy Sue's front panel will come on (see “Status Lights” on page 12).

Click

Reset

. These instructions will display:

If the troughs in the separation tray are empty, click

and proceed with “Cleanup” on page 54.

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands