BIOS Setup
- 23 -
The Choices: Off
(default), On.
LPT & COM
When this option is set to
On
, any event occurring at a
COM(serial)/LPT (printer) port will awaken a system which has been
powered down.
The Choices: LPT/COM
(default), COM, LPT, NONE.
HDD & FDD
When this option is set to
On
, any event occurring on a hard drive or a
floppy drive will awaken a system which has been powered down.
The Choices: On
(default), Off.
PCI Master
When set to
On
, you need a LAN add-on card which supports the
power function. It should also support the wake-up on LAN jump.
The Choices: Off
(default), On.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
The Choices: Disabled
(default), Enabled.
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card which support
power on function. It should also support the wake-up on LAN jump.
Disabled
(default) Wake up on LAN/Ring not supported.
Enabled
Wake up on LAN/Ring supported.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices:
Enabled,
Disabled
(default).
Date (of Month)
You can choose which month the system will boot up. This field is only
configurable when “RTC Resume” is set to “Enabled”.
Resume Time (hh:mm:ss)
You can choose the hour, minute and second the system will boot up.
This field is only configurable when “RTC Resume” is set to “Enabled”.
IRQs Activity Monitoring
Press Enter
to access another sub menu used to configure the different wake
