BIOS Setup
- 22 -
“Former-Sts”
Means to maintain the last status of the CMOS
when AC power is lost.
For example: If set to “Former-Sts” and AC power is lost when system is live,
then after AC power is restored, the system will automatically power on. If AC
power is lost when system is not live, system will remain powered off.
IRQ/Event Activity Detect
If you highlight the literal “Press Enter” next to the “IRQ/Event Activity Detect”
label and then press the enter key, it will take you a submenu with the following
options:
VGA
When set to
On
, any event occurring at a VGA Port will awaken a
system which has been powered down.
The Choices: Off
(default), On.
LPT & COM
When this option is set to
On
, any event occurring at a
COM(serial)/LPT (printer) port will awaken a system which has been
powered down.
The Choices: LPT/COM
(default), COM, LPT, NONE.
HDD & FDD
When this option is set to
On
, any event occurring on a hard drive or a
floppy drive will awaken a system which has been powered down.
The Choices: On
(default), Off.
PCI Master
When set to
On
, you need a LAN add-on card which supports the
power function. It should also support the wake-up on LAN jump.
The Choices: Off
(default), On.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the
system to Full ON state.
The Choices: Disabled
(default), Enabled.
Modem Ring Resume
The Choices: Disabled
(Default), Enabled.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC
(real-time clock) alarm awakens the system from Suspend mode.
The Choices:
Enabled,
Disabled
(default).
