Biostar TForce 965PT Page 85 Setup Manual Download

Page: 85 / 110

TForce 965PT

PCI Express Root Port Func

PCI Express Port 1/ 2 / 3/ 4/ 5/ 6

This item allows you to select the PCI Express Port.

The Choices: Auto

(default), Enabled, Disabled.

PCI-E Compliancy Mode

This item allows you to select the PCI-E Compliancy Mode.

The Choices: v1.0a

(default), v1.0.

VGA Settings

PEG/Onchip VGA Control

This item allows you to enable or disable PEG/On-chip VGA controller.

The Choices: Auto

(default), Onchip VGA, PEG Port.

PEG Force X1

When using on-chip VGA, this item has to be set as X1.

Disabled

(default) PCI Express X16

Enabled

PCI Express X1

On-Chip Frame Buffer Size

This item will be different as your memory modules. When the memory size is
decided, this frame buffer size will also be fixed.

The Choices: 8MB (default), 1MB.

Summary of Contents for TForce 965PT















































































































Search results

Summary of Contents for TForce 965PT

Reviews:

Related manuals for TForce 965PT

Brands by name

Popular brands

Biostar TForce 965PT, Setup Manual

Search results

Summary of Contents for TForce 965PT

Reviews:

Related manuals for TForce 965PT

Brands by name

Popular brands