background image

T5 XE/T5XE CFX-SLI BIOS M anual 

 

38 

PCH Voltage 

T his item allows you to select PCH Voltage control. 
Options:    Auto (Default) / 1.100V ~ 2.030V (Interval: 0.015V) 
 

CPU Load line 

T his item allows you to load line control. 
Options:    Enabled (Default) / Disabled 
 

PWM Frequency 

T his item allows you to set PWM Frequency control. 
Options:    190kHz (Default) / 160kHz / 175kHz / 280kHz 

Intel PPM Configuration 

BIOS S ETUP UTILITY

O.N.E

vxx.xx (C)C opyright 198 5-200x, Amer ican Megatre nds, Inc.

S elect Screen
S elect Item
C hange Option
G eneral Help
S ave and Exit
E xit

+-
F1
F1 0
ES C

Intel  PPM Configur ation

Intel (R)SpeedStep( tm) tech      [Enabled]

Intel

Intel

 C-S TATE tech           [Enabl ed]

C Sta te package li mit setting   [Auto]
C3 St ate                         [ACPI C2]
C6 St ate                         [Enabled]
C1 Au to Demotion                 [Enabled]
C3 Au to Demotion                 [Enabled]

(R)Turbo Mo de tech         [Enabled]

(R)

  Facto ry default T DC limit val ue :

Factory  default TDP l imit value :

Disa bled: Disabl e GV3
Enab le:   Enable  GV3

 

Intel(R) SpeedStep(tm) tech 

T his item allows you to enable SpeedStep technology for better power saving.  
SpeedStep is a technology built into some Intel processors that allows the clock 
speed o f the processor to be dynamically changed by software. 
Options:    Enabled (Default) / Disabled 
 

Summary of Contents for T5XE CFX - BIOS














































Reviews: