Biostar Racing X470GTN, Manual

Page: 29 / 83

Chapter 3: UEFI BIOS & Software | 29
X470GTN
Vivid LED DJ
Vivid LED DJ can adjust your color scheme of VIVID LED ARMOR , MOSFET Heatsink LED , RGB
LED Device and Southbridge Heatsink LED.
1. LED Type: Select the LED lighting blocks.
• System :
System LED illuminations. (MOSFET Heatsink LED, Southbridge Heatsink LED)
• RGB Header 1 : The hearder 1 LED illumination. (RGB LED Device)
• RGB Header 2 : The hearder 2 LED illumination. (RGB LED Device)
• RGB Audio : The RGB Audio LED illumination. (On board LED or VIVID LED ARMOR)
2. Default:
All the setting are back to default.
3. ON/OFF: To enable or disable VIVID LED function.
4. ON/OFF: Allows you to enable or disable VIVID LED of a single item.
5. Color Palette: Allows to you choose specific color of the LEDs.
6. LED Brightness Bar:
Allows you to adjust the LED brightness.
7. Auto: LEDs will Automatically change the Color Palette and LED Brightness.
»
If you select Auto mode, the Color Pallette and LED Brightness Bar will disabled.
8. LED SPARKLE: Allows to you choose sparkle of the LEDs.
• Permanent:
LEDs are constantly lit.
• Shine: LEDs flash at a specific frequency.
• Breath: LEDs gradually flash on and off.
• Shine & Music: LEDs will flash according the music played on your system.
»
Please make sure your speaker or earphone is properly connected to audio jack before using RACING
GT EVO program.