P4M80-M7 BIOS Manual
26
5.3.6 Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with which
I/O Address.
The Choices:378/IRQ7
(default), 278/IRQ5, 3BC/IRQ7, Disabled.
5.3.7 Parallel Port Mode
The default value is SPP.
The Choices:
SPP
(default) Using Parallel port as Standard Printer Port.
EPP
Using Parallel Port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP
Using Parallel port as ECP & EPP mode.
5.3.8 ECP Mode Use DMA
Select a DMA Channel for the port.
The Choices:
3
(default), 1.
5.4 Onboard LAN Device
This item allows you to enable or disable the Onboard LAN Device
controller.
The Choices: Enabled
(default), Disabled.
5.5 Onboard LAN Boot ROM
This item allows you to enable or disable the Onboard LAN Boot ROM
controller.
The Choices: Enabled
(default), Disabled.
