P4SFA BIOS Setup
29
Spread Spectrum
This item allows you to enable/disable the Spread Spectrum function.
The Choices: Enabled
(default), Disabled.
CPU Frequency
This item allows you to control CPU Frequency.
The Choices: Default
(default), 100MHz, 133MHz.
DRAM Frequency
This item allows you to control DRAM Frequency.
The Choices: By SPD
(default), 200MHz, 266MHz, 333MHz.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
