Chapter 2
BIOS Setup
2-17
prefetching.
The Choices: Enabled (default), Disabled.
IDE Primary / Secondary Master / Slave PIO
The IDE PIO (Programmed Input / Output) fields let you set a PIO
mode (0-4) for each of the IDE devices that the onboard IDE interface
supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the
best mode for each device.
The Choices: Auto
(default), Mode0, Mode1, Mode2, Mode3, Mode4.
IDE Primary / Secondary Master / Slave UDMA
Ultra DMA / 33 implementation is possible only if your IDE hard drive
supports. Mode 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the
best mode for each device.
The Choices: Auto
(default), Disabled.
Muti-Media setting
The multimedia setting submenu is used to configure various multimedia
peripherals such as audio and game equipment. If you highlight the literal “Press
Enter” next to the “Muti-Media setting” label and then press the enter key, it will
take you a submenu with the following options:
Onboard Legacy Audio
The field controls the onboard legacy audio.
The Choices: Enabled
(default), Disabled.
Sound Blaster
Hardware SoundBlaster Pro for Windows DOS box and real-mode
DOS legacy compatibility.
The Choices
: Enabled,
Disabled
(default).
SB I/O Base Address
Change the SoundBlaster Pro Base I/O Address settings.
The Choices: 220H
(default), 240H, 260H, 280H.
SB IRQ Select
Change the SoundBlaster Pro interrupt signal.
The Choices: IRQ5
(default), IRQ7, IRQ9, IRQ10.
Summary of Contents for M6VLR
Page 71: ...03 04 2002 ...
