Chapter 2
BIOS Setup
2-19
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O Address.
The Choices:
378/IRQ7
(default), 278/IRQ5, Disabled, 3BC/IRQ7.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Normal EPP
(Extend Parallel Port) ECP (Extend Capabilities Port) ECP +EPP PC AT
parallel port Bidirectional Port Fast, buffered port Fast, buffered, Bidirectional
Port. Select Normal unless you are certain your hardware and software both
support EPP or ECP mode.
The Choices: Norma
l (default), ECP, ECP/EPP,EPP.
ECP Mode Use DMA
Select a DMA Channel for the port.
The Choice:
3
(default).
Parallel Port EPP type
Select a DMA Channel for the port.
The Choices:
EPP1.9
(default), EPP1.7.
Onboard Legacy Audio
Select an operating mode for the second serial port:
The choices: Enabled
(default),
Disabled.
Sound Blaster
Hardware SoundBlaster Pro for Windows DOS box and real-mode DOS legacy
compatibility.
SB I/O Base Address
Change the SoundBlaster Pro Base I/O Address settings.
SB IRQ Select
Change the SoundBlaster Pro interrupt signal.
