Biostar M6VCG, User Manual

Page: 81 / 85

Chapter 4 Trouble Shooting
4-6
!"#$
!=-
(. 2( (./(2
No power to monitor. Check the power
connectors to monitor and
to system. Make sure
monitor is connected to
display card, change I/O
address on network card if
applicable.
Monitor not connected to
computer. See instructions above.
Network card I/O address
conflict. See instructions above.
!"#$
(. 2( (./(2
Memory problem, display
card jumpers not set
correctly. Reboot computer.
Reinstall memory, make
sure that all memory
modules are installed in
correct sockets. Check
jumper and switch
settings on display card.
See display card section
for information on
settings.
Computer virus. Use anti-virus programs
(mcAfee, E-Prot, etc) to
detect and clean viruses.