Biostar M6TLD, Manual

Page: 39 / 41

$%&
This program is designed for following versions of BIOSTAR
Mainboard to fix the problem that IDE BUS Master, USB and
Power management entries cannot be configured correctly
in the device manager.
This section describes how to install the software on a
system where Windows 95* is installed.
"Windows 95*" means the following versions of Windows 95
operating system:
Version 950 Windows 95 (Retail Release)
Version 950A Windows 95 OEM Service Release 1 (OSR1)
Version 950B Windows 95 OEM Service Release 2.0 (OSR2)
or Windows 95 OEM Service Release 2.0 plus
USB Supplement (OSR2.1)
1. Check the System Requirements. Windows 95* must
be fully installed and running on the system prior
to running this software.
2. Close any running applications.
3. Remove references to installed real-mode IDE device
drivers in the AUTOEXEC.BAT and CONFIG.SYS files
(especially any drivers that control ATAPI CD-ROM
and special IDE features). Use the Notepad utility
to do this.