Biostar M6TBC, Manual

Page: 38 / 39

)
and special IDE features). Use the Notepad utility
to do this.
4. The driver files are stored in an integrated
application setup program. This program is a
Windows 95* program that allows the driver files
to be INSTALLED.
Execute the driver setup program.
*** Run BSFIX.EXE.
5. Click 'Start' on Main Screen to begin the install
procedure.
NOTE: If you click 'Cancel', program will
terminate.
6. After the install procedure completed, click 'OK'
to restart the system when prompted to do so. If
you don't want to reboot immediately, you must
remember to reboot your system later!
7. Follow the screen instructions and use default
settings to complete the setup when Windows 95* is
re-started.
Upon re-start, Windows 95* will display that it has
found an Intel PCI Bus Master IDE controller
hardware and also installing hardware for it.
If a "New Hardware Found" dialog box is displayed
requesting the location of the drivers, use the
mouse to click on the scrollbar and click on the
<Windows 95* directory> \ System \ IOSubSys path:
For example:
a. Click on 'C:\WINDOWS\SYSTEM\IOSUBSYS\'
b. Click 'OK'.
8. Select 'Yes', when prompted to re-start Windows
95*.