Biostar M5SAB, Manual

Page: 81 / 88

Chapter 4 Trouble Shooting
-6,
(-,
!
#+ 1# #+0#1
Connector between hard
drive and system board
unplugged. When attempting to run
the FDISK utility
described in the HARD
DISK section of this
manual you get a
message, INVALID
DRIVE SPECIFICATION. Check cable running
from disk to disk
controller board. Make
sure both ends are
securely plugged in;
check the drive type in
the Standard CMOS
Setup (see HARD DISK
section of this manual).
Damaged Hard Disk or
Disk Controller. Format hard disk; if
unable to do so the hard
disk may be defective. Contact Technical
Support.
Hard Disk directory or
FAT is scrambled. Run the FDISK program,
format the hard drive
(see HARD DRIVE
section of manual). Copy
data that was backed up
onto Hard Drive. Backing up the hard
drive is extremely
important. All Hard Disks
are capable of breaking
down at any time.
(-,
! 'F
F'
#+ 1# #+0#1
Hard Disk boot program
has been destroyed. A number of causes
could be behind this. Back up data and
applications files.
Reformat the Hard Drive
as described in the Hard
Drive section of this
manual. Re-install
applications and data
using backup disks.