Motherboard Manual
6
Step 2:
Insert the DIMM firmly into the slot until the retaining chip snap back in place
and the DIMM is properly seated.
Note1:
The DIMM must be installed to DIMMA1 slot first.
Note2:
If the DIMM does not go in smoothly, do not force it. Pull it all the way out and try again.
B. Memory Capacity
DIMM Socket Location
DDR3L Module
Total Memory Size
DIMMA1 512MB/1GB/2GB/4GB/8GB
Max is 16GB
DIMMB1 512MB/1GB/2GB/4GB/8GB
C. Dual Channel Memory Installation
Please refer to the following requirements to activate Dual Channel function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
DIMMA1
DIMMB1
Disabled O
X
Enabled O
O
(O means memory installed, X means memory not installed.)
Note:
The DRAM bus width of the memory module must be the same (x8 or x16)
