Intel Bay Trail Mini-ITX Motherboard
5
CHAPTER 2: HARDWARE INSTALLATION
2.1 Connect
Cooling
Fans
These fan headers support cooling-fans built in the computer. The fan cable and
connector may be different according to the fan manufacturer. Connect the fan
cable to the connector while matching the black wire to pin#1.
SYS_FAN1/2: System Fan Header
Pin
Assignment
1
Ground
2
+12V
3
FAN RPM rate sense
Note:
SYS_FAN1/2 support 4-pin and 3-pin head connectors. When connecting with
wires onto connectors, please note that the red wire is the positive and should be
connected to pin#2, and the black wire is Ground and should be connected to GND.
2.2 Install
System
Memory
A. DDR3L SO-DIMM Module (1.35V/1.5V)
Step 1:
Align a DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
