Biostar IDEQ C1, User Manual

Page: 19 / 57

Step 4:
Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1.
This completes the installation.
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan wiring and plug may be different
according to the fan manufacturer. Connect the fan cable to the connector while matching the black
wire to pin#1.
CPU FAN Header: JCFAN1
System Fan Header: JSFAN1
Pin Assignment
1 Ground
2 Smart Fan Control
1
3
3 FAN RPM rate sense
Pin Assignment
1 Ground
2 Smart Fan Control
1 3
3 FAN RPM rate sense
MEMORY MODULE INSTALLATION
1. Unlock a DIMM slot by pressing the retaining clips outward.Align a DIMM on the slot such
that the notch on the DIMM matches the break on the Slot.
2. Insert the DIMM vertically and firmly into the slot unti l the retaining chip snap back
in place and the DIMM is properly seated.
Step 3:
Hold the CPU down firmly, and then close the lever to complete the installation.
12 13