Biostar iDEQ 330G, Supplementary Manual

Page: 11 / 25

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such
that the notch on the DIMM matches the break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place
and the DIMM is properly seated.
Installing System Memory
2.5
Connectors and Slots
2.6
FDD1: Floppy Disk Connector (optional)
The motherboard provides a standard floppy disk connector that supports 360K, 720K,
1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy
drive ribbon cables
Super I/O
BIOS
BAT1
Codec
Intel
ICH6R
Grantsdale-G
Giga LAN
IEEE1394
Chip
DDRA1 DDRB1
Super I/O
BIOS
BAT1
Codec
Intel
ICH6R
Grantsdale-G
Giga LAN
IEEE1394
Chip
FDD1
1 2
15 16
IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~5,
Bus Master, and Ultra DMA 33/ 66/ 100 functionality.
Super I/O
BIOS
BAT1
Codec
Intel
ICH6R
Grantsdale-G
Giga LAN
IEEE1394
Chip
IDE1
1
2
39
40