Biostar I915P-A7 User Manual Download Page 10

Page: 10 / 64

I915P-A7 PCI-ED

I91PL-A7 PCI-ED

Step 3:

Hold the CPU down firmly, and then close the lever to complete

the installation.

Step 4:

Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN

power cable to the JCFAN1. This completes the installation.

2.2 FAN

EADERS

These fan headers support cooling-fans built in the computer. The fan
wiring and plug may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to
pin#1.

JC FAN1: Powe r Source for CPU Fan

Pin Assignment

1 Ground
2 Power
3

FAN RPM rate sense

Smart Fan Control

JSFAN1/JSFAN2: Powe r Source for System Fan
(JSFAN2 is optional.)

Pin Assignment

1 Ground
2

Smart Fan Control

FAN RPM rate sense

Note:

The JCFAN1, JSFAN1 and JSFAN2 support system cooling fan with

Smart Fan Control utility. They support 4-pin and 3-pin head connectors.
When connecting with wires onto connectors, please note that the red

wire is the positive and should be connected to pin#2, and the black wire
is Ground and should be connected to GND.

Summary of Contents for I915P-A7

































































Search results

Summary of Contents for I915P-A7

Reviews:

Brands by name

Popular brands

Biostar I915P-A7, User Manual

Search results

Summary of Contents for I915P-A7

Reviews:

Brands by name

Popular brands