P4 TGQ-M775 BIOS Setup
User’s Manual
33
9. FREQUENCY
CONTROL
9.1 CPU
C
LOCK
R
ATIO
The Choices: 8X
(default), 9X, 10X, 11X, 12X, 13X, 14 X, 15X, 16X, 17X,
18X, 19X, 20 X, 21 X, 22 X, and 23X.
9.2 A
UTO
D
ETECT
PCI C
LK
This item allows you to enable / disable auto Detect PCI Clock.
The Choices: Enabled
(default), Disabled.
9.3 CPU
C
LOCK
This
item allows you to select CPU Clock, and CPU over clocking.
Special Notice:
If unfortunately, the system’s frequency that you are selected is not
functioning, there are two methods of booting-up the system.
Method 1:
Clear the COMS data by setting the JCOMS1 ((2-3) closed)) as “ON”
status. All the CMOS data will be loaded as defaults setting.
Method 2:
Press the <Insert> key and Power button simultaneously, after that
keep-on pressing the <Insert> key until the power-on screen showed.
This action will boot-up the system according to FSB of the processor.
It’s strongly recommended to set CPU Vcore and clock in default setting. If the
CPU Vcore and clock are not in default setting, it may cause CPU or M/B damage.
