Hi-Fi P61S2
15
F_AUDIO1: Front Panel Audio Header
This header allows users to connect the front audio output cable with the PC
front panel.
HD Audio
AC’97
Pin
Assignment
Pin
Assignment
1
Mic Left in
1
Mic In
2 Ground
2 Ground
3
Mic Right in
3
Mic Power
4 GPIO
4 Audio
Power
5
Right line in
5
RT Line Out
6 Jack
Sense 6 RT
Line
Out
7 Front
Sense
7 Reserved
8 Key
8 Key
9
Left line in
9
LFT Line Out
10
Jack Sense
10
LFT Line Out
Note1:
It is recommended that you connect a high-definition front panel audio module to
this connector to avail of the motherboard's high definition audio capability.
Note2:
Please try to disable the "Front Panel Jack Detection" if you want to use an AC'97
front audio output cable. The function can be found via O.S. Audio Utility.
JCMOS1: Clear CMOS Header
Placing the jumper on pin2-3 allows users to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
3
Pin 2-3 Close:
Clear CMOS data.
※
Clear CMOS Procedures:
1.
Remove AC power line.
2.
Set the jumper to “Pin 2-3 close”.
3.
Wait for five seconds.
4.
Set the jumper to “Pin 1-2 close”.
5.
Power on the AC.
6.
Load Optimal Defaults and save settings in CMOS.
