30 | 6. O.N.E Menu
Memory Profile
Select DIMM timing profile. The blow values start with the current running values and don’t auto
populate.
Options: Auto (Default) / Manual
Note
The following items appear only when you set the Memory Profiles function to [Manual]
»
Memory Reference Clock
This sets the memory reference clock in Automatic, 133MHZ or 100MHZ.
Options: Auto (Default) / 133 / 100
Memory Ratio
Automatic or the frequency will equal ratio times reference clock. Set to Auto to recalculate
memory timings listed below.
Options: Auto (Default) / DDR4 1066Mhz / DDR4 1333Mhz / DDR4 1600Mhz / DDR4 1866MHz /
DDR4 2133MHz
QCLK Odd Ratio
Adds 133 or 100 MHz to QCLK frequency, depending on ReClk.
Options: Disabled (Default) / Enabled
Memory Timing Configuration
Note
The following items appear only when you set the Memory Profiles function to [Manual]
»
tCL
This item allows you to select CAS Latency, 0: AUTO, max: 31
Options: Auto (Default)
tRCD/tRP
This item allows you to select RAS to CAS delay time and Row Prechrge delay time, 0: AUTO,
max: 63
Options: Auto (Default)
