BIPV10-IAP
45
DRAM Frequency
This item allows you to set the frequency of DRAM.
Options: Auto (Default) / Max MHz
Configure DRAM timing by SPD
This item allows you .to determine DRAM timing by SPD
Options: Enabled (Default) / Disabled
DRAM CAS# Latency
Options: 5 (Default) / 3 / 4 / 6
DRAM RAS# to CAS# Delay
Options: 5 DRAM Clocks (Default) / 3 ~ 10DRAM Clocks
DRAM RAS# Precharge
Options: 5 DRAM Clocks (Default) / 3 ~ 10DRAM Clocks
DRAM RAS# Activate to Precharge
Options: 15 DRAM Clocks (Default) / 9 ~ 24 DRAM Clocks
Initate Graphic Adapter
Select which graphics controller to use as the primary boot device.
Options: PCI/IGD (Default) / IGD
Internal Graphics Mode Select
Select the amount of system memory used by the Internal graphics device. This item
will be different as your memory modules. When the memory size is decided, this
frame buffer size will also be fixed.
Options: Enabled, 8MB (Default)
