8 |
Chapter 2: Hardware installation
Step 1: Align a DIMM on the slot such that the notch on the DIMM matches the break on the
Slot.
Step 2: Insert the DIMM firmly into the slot until the retaining chip snap back in place and the
DIMM is properly seated.
Memory Capacity
DIMM Socket Location
DDR3 Module
Total Memory Size
DIMMA1
512MB/1GB/2GB/4GB/8GB
Max is 8GB
2.4
Power Supply
JPWR1: 4-pin ATX Power Source Connector (BIMX-100)
This connector provides or +12V input to system power circuit.
Pin Assignment
1
+12V in
2
+12V in
3
Ground
4
Ground
