B85MG
13
2.6 Jumper
Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is “close”, if not, that means the jumper is “open”.
Pin opened
Pin closed
Pin1-2 closed
JCMOS1: Clear CMOS Jumper (PCB V6.5~V6.6)
The jumper allows users to restore the BIOS safe setting and the CMOS data.
Please carefully follow the procedures to avoid damaging the motherboard.
1 2
Pin 1-2 Open:
Normal Operation (default).
1
2
Pin 1-2 Close:
Clear CMOS data.
※
Clear CMOS Procedures:
1.
Remove AC power line.
2.
Set the jumper to “Pin 1-2 close”, you can use a metal object like a
screwdriver to touch the two pins.
3.
Wait for five seconds.
4.
After clearing the CMOS values, be sure the jumper is “Pin 1-2 open”.
5.
Power on the AC.
6.
Load Optimal Defaults and save settings in CMOS.
