Chapter 2: Hardware installation
| 7
A10N-8800E
Chapter 2: Hardware installation
2.1 Connect Cooling Fans
These fan headers support cooling-fans built in the computer. The fan cable and connector
may be different according to the fan manufacturer.
CPU_FAN1: CPU Fan Header
Pin Assignment
1
Ground
2
Linear FAN Control
3
FAN RPM rate sense
SYS_FAN1: System Fan Header
Pin Assignment
1
Ground
2
+12V
3
FAN RPM rate sense
Note
»
CPU_FAN1, SYS_FAN1 support 3-pin head connectors. When connecting with wires onto connectors,
please note that the red wire is the positive and should be connected to pin#2, and the black wire is
Ground and should be connected to pin#1(GND).
2.2 Install System Memory
DDR4 Modules
Summary of Contents for A10N-8800E
