9
BioSmart 5M-O/5M-E Installation Guide v1.2|10.2018|en
Mounting on wall
1.
Decide where to install controller, using a mounting template.
2.
Drill holes, according to a mounting template and insert dowels inside the holes.
3.
Place back cover on wall and fix it with self-tapping screws.
4.
Connect power supply, lock and buttons, if needed, according to p.2.4-2.8. Put cables
through cable input.
5.
In order to protect controller from electrostatic discharge, connect an annular crimp in a top
left corner of PCB with a grounding device (see figure below).
