Measurement
Accuracy
Laboratory:
± 0.2°C, 32°C to 42.2°C/
± 0.4°F, 89.6°F to 108.0°F
Display
L
iquid
C
rystal
D
isplay, 4 digits plus special icons
Acoustic
• The unit is turned ON and ready for the
measurement: 1 short beep
• Complete the measurement:
1 long beep (1 second) if the reading is less than
37.5°C/99.5°F, 10 short beeps sound, if the reading
is equal to or greater than 37.5°C/99.5°F
• System error or malfunction: 3 short beep
sounds
Memory
• Auto-Display the last measured temperature
• 30 readings recall in the Memory Mode
Backlight
• The display light will be
GREEN
for 1 second,
when the unit is turned ON.
• The display light will be
GREEN
for 5 seconds,
when a measurement is completed with a
reading less than 37.5°C/99.5°F
• The display light will be
RED
for 5 seconds,
when a measurement is completed with a
reading equal to or higher than 37.5°C/99.3°F
Operating
Temperature
10°C to 40°C/50°F to 104°F
15% - 95% relative maximum humidity
Storage Temperature
-25°C to 55°C/-13°F to 131°F
15% - 95% relative maximum humidity
Automatic Switch-
Off
Approximately 1 minute after last measurement
has been taken.
Battery
CR2032 Battery 3V - at least 700 measurements
Dimensions
139 (L) x 39 (W) x 42 (H) mm
Weight
54.5 g (with battery), 51 g (without battery)
Reference to
Standards
EN 12470-5; ASTM E1965; IEC 60601-1; IEC 60601-
1-2 (EMC), IEC 60601-1-11 This device complies
with the requirements of the Medical Device
Directive 93/42/EEC.
