2.4 Using the AC Adapter
You may also operate this monitor using the
included AC adapter (output 6V DC/600 mA with
DIN plug). Use only the included AC adapter to
avoid damaging the unit.
1. Ensure that the AC adapter and cable are not
damaged.
2. Plug the adapter cable into the AC adapter port
on the blood pressure monitor.
3. Plug the adapter into your electrical outlet. When the AC adapter is connected, no battery current is consumed.
Note: No power is taken from the batteries while the AC adapter is connected to the monitor. If electrical power
is interrupted, (e.g., by accidental removal of the AC adapter from the outlet) the monitor must be reset by
removing the plug from the socket and reinserting the AC adapter connection.
Functional check:
Hold the button down to test all the display elements. When functioning correctly all
segments must appear.
3. Using the Device
This section describes how to get the maximum benefit from your 3MS1-4K blood pressure monitor. Follow the
instructions carefully to get an accurate measurement of your blood pressure and pulse rate.
3.1 Setting the Time and Date
When you insert the batteries for the first time (see “Inserting the batteries”), the monitor
prompts you to set the current date and time. You can also adjust the date and
time by pressing and holding down the button for over 3 seconds. Follow these steps
to set the date and time settings:
1. When you press the button for over 3 seconds, the year will start flashing. Press the
button to adjust the year and press the button to confirm setting.
2. Next, the screen starts flashing the month setting. Press the button repeatedly to
set the month and then press the button to confirm the settings. Follow the same
steps to set the date setting.
3. Lastly, the screen starts flashing the hour values. Press the button repeatedly to set
the hour and then press the button to confirm the settings. Follow the same steps
to set the minute values.
MONTH-DATE
TIME
