5. Signals from other household devices, such as door bells and home security
systems, may temporarily interfere with the units and cause reception failure.
The transmission and reception of temperature reading will resume once the
interference has stopped.
The maximum transmission range is 30 meters (100 feet) from the remote sensor to
the monitor (in open space). However, this depends on the surrounding environment
and interference levels. The temperature signal travels in a straight line from the
remote sensor to the monitor. The signal will not curve around an object. If no
reception is possible, despite the observation of these factors, all units will have to
be reset.
Note: To reset unit please see 1.0 Set up Procedure.
3.0 Maximum and Minimum Temperature
1. Press the MAX/MIN button once to display the indoor and press again for the
outdoor max/min temperature recorded.
2. To clear the memory, press the CLEAR button when the max/min temperature is
displayed. It will clear the record of the shown temperature field.
4.0 ºC/ºF Switchable
The default measurement for temperature is °F, press the ºC/ºF button to toggle
between °C and °F.
5.0 Signal Detection
The signal indicator on the monitor will display the following in the outdoor
temperature window:
6.0 Care of Your Thermometer
• Avoid exposing the thermometer to extreme temperatures, water or severe shock.
• Avoid contact with any corrosive materials such as alcohol, cleaning agents or
perfume.
• Do not subject the thermometer to excessive force, shock, dust, temperature or
humidity. Any of these conditions may shorten the life of the thermometer.
• Do not tamper with any of the internal components of this thermometer.
This will void the warranty and may cause damage.
No Signal Detected
Signal Detected
Successful Reception
