BIOS WEATHER 315BC, Instructions Manual, Page: 3 / 7

Project Type
Instructions
Date: February 20 2020
Customer: Thermor Ltd
Job Number: TH1738
Item Number: 315BC
Designer: Alex Vranjesevic
PO: 24568-00
Revision: A
Artwork is not to be amended or scaled. If any changes
are required please send through Thermor office with
instructions, and we will amend here and resend artwork
through. PLEASE RETURN WITH SIGNATURE
Contact: Graphic’s Department
graphics@thermor-ins.com
Colour Breakdown
Reason For Project:
New Item:
New Branding:
Design Update:
N/A: X
UPC (For Reference Only)
Indoor/Outdoor Indoor/Outdoor
Wireless Thermometer Wireless Thermometer
Monitor Monitor
A. Indoor Temperature Trend A. Indoor Temperature Trend
B. Indoor Temperature B. Indoor Temperature
C. Channel C. Channel
D. Outdoor Temperature Trend D. Outdoor Temperature Trend
E. Outdoor Temperature E. Outdoor Temperature
1. Max/Min Button 1. Max/Min Button
2. CH Button 2. CH Button
3. °C/°F Button 3. °C/°F Button
Sensor: Sensor:
4. TX Button 4. TX Button
5. Channel Switch (Under Battery Cover) 5. Channel Switch (Under Battery Cover)
Care of the Device Care of the Device
• Avoid exposing units to extreme temperatures or severe shock.
• Avoid contact with any corrosive materials such as perfume, alcohol or
cleaning agents.
• Do not Do not subject the units to excessive force, shock, dust, temperature or
humidity. Any of these conditions may shorten the life of the units.
• Do not Do not tamper with any of the internal components of these units. This
will invalidate the warranty and may cause damage.
Correct Usage of Batteries Correct Usage of Batteries
• Do not Do not mix standard and rechargeable batteries.
• Do not Do not mix new and old batteries.
• When the low battery symbol appears on the display replace all
batteries with new ones.
Setup Procedure Setup Procedure
1. Insert batteries into the monitor first.
2. Using a screwdriver (not included) remove the screws on the back of the
sensor to open the battery compartment.
3. Place the monitor as close as possible next to the remote sensor. Before
inserting the batteries into the sensor ensure the correct channel is
selected, then insert the batteries into the remote sensor.
4. The remote sensor will send a signal to the monitor. Once the signal is
received, the dashes (--.-°F) on the monitor will change to the current
outdoor temperature.