2. Plug the adapter into the back of the unit and then into an outlet.
3. Press the button to turn the unit on.
4. Press the button again to turn on the
15 minute
timer. The small LED
underneath the 15 will light up.
5. Press the button again to turn on the
30 minute
timer, continue to press the
button to turn on the 60, 90, 120 minute timer.
6. When the unit is on, you can press the
+
or
–
buttons to change the light
intensity. When the unit is turned off and turned back on with the button and
the adapter is not unplugged, the last level of intensity you selected is still stored.
There are 5 levels of brightness to choose from. If the unit is unplugged the light
brightness will reset to the highest level.
NOTE:
To get the full benefits of the 10,000 LUX the light needs to be on the
highest brightness level.
7. To turn the Jumbo Therapy Light off, press and hold the button for 5 seconds
and the unit will turn off.
3.1
Using the Therapy Light
When using the Jumbo Therapy Light, you are to maintain a distance of 10 – 60 cm /
3.9” – 23.6” between your face and the light. The closer you are to the light the
less time you should use it. The duration of the application depends on the distance.
Please see the chart below:
Minimum Distance
Recommended Duration Per Day
10 cm / 3.9”
15 minutes
20 cm / 7.9”
30 minutes
40 cm / 15.7”
1 hour
60 cm / 23.6”
2 hours
3.2
Mood Lighting
The Jumbo Therapy Light also features a fun mood lighting feature that turns on up to
256 coloured atmospheric lights. You may choose to rotate them in a loop or to set it at
one colour.
Note:
The timer function and light intensity settings also work with the mood lighting.
See the steps in section 3.0 above to change.
1. To activate the mood lighting, first turn on the Jumbo Therapy Light by pressing the
button. Next press the button. The mood lighting will begin the colour
rotation.
2. You may choose to set the light on one colour by pressing the button once.
To begin the colour rotation again, press the button again.
3. To turn the mood lighting off and return back to the white light press and hold the
button for about 5 seconds.
